Alcon Hyper-RTV Neutral Liquid Gasket 90 gr.
It is a neutral oxime-based silicone gasket that maintains its flexibility up to +300 °C and does not lose its sealing properties even in oily and dirty environments.
- Neutral oxide based new generation liquid seal.
- It does not emit any odor that will negatively affect the sensors during curing.
- Resistant to shrinkage and cracking caused by exposure to thermal cycling.
- Once curing is complete, it operates between -60 °C and +300 °C.
- Resistant formulation developed especially for oily and dirty surfaces.
- Once cured, it is resistant to oil, antifreeze, gasoline, diesel and sea water.
- It can be dismantled when necessary.
- Strong adhesion, covering ability, permanent elasticity, extra sealing.
| Product Code | Color | Packaging Type | Pieces |
| M-3304 |  Black | 90 gr. Blister | 12 |
| M-3303 |  Red | 90 gr. Blister | 12 |
| M-3308 |  Grey | 90 gr. Blister | 12 |
Colours: Red-Black-Gray
Curing: Neutral Oxim
Elongation at Break: 22
Viscosity/Appearance: Thixotropic paste
Density: 1.05g/cm3
Elasticity: 450%
First Surface Filming Time: 15 minutes (at +23 °C)
Curing: 3 mm/day
Temperature Resistance: -60 °C to + 300 °C
Extrusion Speed: 220g/min
Application Surface Temperature: + 5 °C – + 40 °C
Application Surface Preparation
– Dust, oil and dirt on the surfaces that will come into contact with the liquid seal are cleaned.
– If there are gasket residues previously applied to the surfaces, they should be cleaned by mechanical methods.
Application Method
– Apply the liquid seal to a single surface. Wait 5-10 minutes, assemble the parts.
– For small sealing surfaces, parts can be assembled immediately if necessary.
– The mouth of the tube should not be left open after application.
– Filling all surfaces that need to be sealed and corrosion gaps,
– In automobiles, trucks, buses, military vehicles, ships, machinery, heating systems, industrial furnaces and chimneys,
– In the sealing of sensitive surfaces exposed to high heat or temperature changes, on surfaces that require sealing but where rubber, cork and clingstone type seals cannot be applied,
– In the gasket areas of all engines, differential covers, carburetor covers and pumps, thermostats, gearboxes, gearboxes, etc. It is used on surfaces exposed to vibrations and heat.
– Keep out of reach of children.
– Avoid contact with eyes and skin.
– In case of contact with eyes, rinse immediately with plenty of water and consult a doctor.
– Wear appropriate protective clothing, protective gloves, and protective glasses/mask while working.
– In case of accident or if you feel unwell, consult a doctor immediately.
– If swallowed, seek medical advice immediately and show the container or label.
– Do not pour into the sewer system. Dispose of waste and its container according to local hazardous or special waste collection rules.
