Alcon Silicone Lubricant & Mold Release Spray
Alcon Silicone Lubricant Spray is a multipurpose lubricant for maintenance workshops, car service centers and individual uses. It is also a very good mold release agent used in mold industry. Used to lubricate parts, reduce friction and noise, clean, not generate static electricity and protect paste. And used to ensure; prevention of cracking of door tires, prevention of freezing and adhering of doors in cold weather, protection of vehicle hood tires, radiator pipes, seat belt mechanism, seat rail railing, lubrication of seat rails, maintenance and dust holding of parts such as vehicle front louvers, bumpers, door tubes.
- Fast effect
- Does not cause corrosion
- Extended nozzle life
- Easy application
| Product Code | Packaging Type | Pieces |
| M-9005 | 400 ml | 24 |
Appearance: Aerosol Containing A Liquefied Gas
Colour: Colourless
Odour: Characteristic
Initial Boiling Point And Boiling Range: No Data Available
Flash Point: 98 °C
Evaporation Rate: Not Applicable
Flammability (solid, gas): Extremely Flammable Aerosol.
Upper Explosion Limit: 12.0 %(V)
Lower Explosion Limit: 1.6 %(V)
Vapour Pressure: 1,965.08 mbar (50 °C)
Relative Vapour Density: Not Applicable
Density: 0.61 g/cm3 (20 °C)
Water Solubility: Insoluble (20 °C)
Partition Coefficient: Noctanol/Water: Not Applicable
Auto-Ignition Temperature: 200 °C
Viscosity, Dynamic: Not Applicable
Explosive Properties: Not Explosive
Oxidizing Properties: The Substance Or Mixture Is Not Classified As Oxidizing.
Clean the surface before using, shake the can and spray from a distance of approximately 25-30 cm. Clean the excessively squeezed places. It is colorless and heat-resistance [ – 20 ºC / + 240 ºC ]
It can be tightened in every direction, under favour of special valve.
Read the label before using.
– Do not spray on fire or incandescent metals.
– Do not puncture empty can sand do not throw into the fire.
– The can is pressurized.Keep away from sunlight and store at temparatures lower than+50 °C.
– Do not inhale the aerosols.
– Avoid contact of eyes , rinse with plenty of water immediately and seek medical attention.
– Utilize protective clothes, protective gloves, protective googles /masks while working.
– Only use in well ventilated areas.
– Keep away from ignition sources , do not smoke.
– Do not release into the sewers.Dispose of the waste and its container in designated sites for dangerous or special waste collection.
