With this product, which is filled with epoxy and dense aluminum, it is possible to make model, mold and prototype and cast aluminum light parts. The most precise details can be obtained in making mould. In repair works, it infiltrates into the finest gaps of materials and makes filling. It integrates with applied materials without shrinking. Fractures, casting cavities and corroded areas can be filled and leveled. After the material is hardened, the lathe can be leveled. It is very suitable for practical use
After hardening, ALCON F-2 is resistant to fuels, water, oil, vibration and a certain degree of heat.
| Product Code | Color | Packaging Type | Pieces |
| M-2225 | Aluminium | 500 gr. Box | 10 |
Color: After mixing Aluminum
Mixture ratio; Weight: 9;1-Volume: 4;1
Curing at 23° C for 500 g: 75 minutes
Maximum working heat: 121°C
Spesific volume: 628 cm³/kg
Heat Resistance: [- 35 °C / + 120 °C]
Preparation the bonding material:
The surface should be cleaned from water, oil, rust and dirt. If the surface is glossy. It should be roughened with sandpaper and file.
Application:
Given in two components of ALCON F-2 aluminium metal bond;
Aluminium colored liquid resin by volume 4 scales are (by weight 9 units), hardening of components by volume 1 scale is (by weight 1 unit). Throughly mixed, spread on both sides of the bonding parts and compound the parts carefully. Wan’t until, it becomes harden.
Hardening:
At room temperature 25-30°C takes 4-6 hours. If you are prompted early hardening pasted parts in a flameless heating at 70-90°C. The desired result can be achieved in 2-3 hours.
With this product which is filled with aluminum, it is possible to make model, mold and prototype, aluminum light casting process.
Keep under lock and key and out of reach of children.
Avoid contact with skin
Rinse immediately with plenty of water and seek contact with eyes.
After contact with skin wash immediately with soap and water.
Suitable protective clothing, gloves and eye / face protection.
Consult a doctor immediately in case of accident or if you feel unwell.
Avoid release to the environment.
